Gypsum Plaster

Product Details:

Range Of Vinayak Gypsum Plaster:

• Vinayak Gypsum
• Vinayak Gypsum Fine
• Vinayak Gypsum Super Fine

Salient Features:

• Premixed lightweight Plaster.
• Easy Workability: Easy to mix - Easy to Apply.
• Free from inherent shrinkage cracks.
• Classified as noncombustible (BS:476 part 4:1970)
• Light Weight – Better strength to weight ratio as compared to density.
• Achieves total strength within 48 hours on complete drying (Quick drying)
• Better sound absorption.

Basic Important Facts:

• The consumption of Gypsum Plaster is directly related to the line & level of the walls in the building, which is a variable factor. It also depends upon the basic wall base material i.e. Bricks/Blocks.
• Based on field trials & experience, the consumption pattern of Gypsum Plaster varies between 1.5 kg. in a right angle finish on the walls.
• It is advisable to do a mock-up of an entire flat in your building to ascertain the actual consumption pattern of Gypsum Plaster.

Guidelines For Application:

• Fittings & plugging should be done before plastering. Openings, chasing etc. (for fittings or conduits ) should be filled firmly before starting plastering.
• Entire background (to be plastered) should be thoroughly brushed & cleaned to remove dust, loose mortar & oil/grease.
• The surface should be reasonably dry & protected from weather conditions. The height suction background should be adjusted by sprinkling water.
• Always mix powder, not water to powder. The material should be thoroughly mixed & stirred as to ensure it is free from lumps and impurities before use.
• Once plaster wet mix is made & has started to do a set, it should not be tempered with fresh mix or powder, as it will affect the properties.
• Due care should be taken to ensure that rapid loss of water is avoided, in not & dry condition.
• Tools & Water used should be clean & free of impurities.
• To ensure that hands are dry before always fold open end of the bag, to protect plaster from moisture.
• Bags should be handled carefully to avoid tearing. Hooks are not recommended.

Specifications:

Product Details:

Setting Time:

Test Method: DIN 1168 Part 2 (Vicat needle method)

Remarks: Initial setting time Complies with the specification limits of DIN 1168-2

 

Bending Strength:

Our Material Testing Services have conducted a laboratory mix using the supplied ordinary gypsum powder for bending strength as DIN 1168 Part 2 & DIN 1164 Part 7.

Remarks: Bending Strength Complies with the specification limits of DIN 1168-2

 

Compressive Strength:

The test was conducted in accordance with DIN 1168 Part 2

Remarks: Compressive Strength Complies with the specification limits of DIN 1168-2

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: NAHAVA SHEVA
• Production Capacity: 500 MT
• Delivery Time: 15 DAYS
• Packaging Details: CNF NAHAVA SHEVA $55 PER MT MINIMUM 27 MT EXPORT QUALITY P-P LAMINATED

Product Details:

 

Setting Time:

• Test Method: DIN 1168 Part 2 (Vicat needle method)

Remarks: Initial setting time Complies with the specification limits of DIN 1168-2

Bending Strength:

• Our Material Testing Services have conducted a laboratory mix using the supplied ordinary gypsum powder for bending strength as DIN 1168 Part 2 & DIN 1164 Part 7.

Remarks: Bending Strength Complies with the specification limits of DIN 1168-2

Compressive Strength:

• Test was conducted in accordance with DIN 1168 Part 2

 

Product Details:

V Plus Polymer Bond Gypsum Plaster is a polymer modified ready to use plaster. This product eliminates the disadvantages of traditional gypsum and added new features to plaster, most notably:

• Very high adhesion
• Slow settinf time creating a minimum thirst
• High resisitance against impact and pressure
• High resisitance against moisture and water
• Lower density and more coverage area
• Resistance to heat and fire
• Can be sprayed
• No cracks post appilication
• Single step performance witout the need for plaster

These features have made it possible for plaster to replace white cement in a cost-effective manner in some cases. Execution ability on different levels such as brick, concrete, pottery, cemment block.

Product Details:

Gypsum Vermiculite Plaster

Additional Information:

• Item Code: 25201090
• Production Capacity: 500 MT/DAY
• Delivery Time: 24 Hours
• Packaging Details: High Quality Export PP Laminated We also provides O.E.M services

Product Details:

Feature & Advantages:

• It can be directly applied to the above mention Area of Applications, so there is no need of cement plaster & POP/Neeru Finished etc
• Free from inherent shrinkage cracking, low density, no curing, and no fungus provide a smooth surface, holds nails & other fittings, all normal decoration etc.

Indefinite Life:

• Gypsum plaster contains no dangerous chlorides. It retains its composition for thousands of years as testified by the construction of the Cheops Pyramids

Absence of Shrinkage Cracking:

• Gypsum plasters do not shrink (unlike cement) during the drying out and hardening process.

Insulation Properties:

• Gypsum plasters have low conductivity and good thermal properties, ensuring energy and power saving. Tested in accordance with BS 874:1973. Appendix - C, Class "A" in accordance to DIN 4102. The thermal conductivity is 0.32 W/mK

Flexural Tensile Strength:

• Gypsum plasters exhibit high tensile and flexural strength. They are less prone to cracking or debonding due to thermal, tensile and shearing movement of the background

Non-Toxic and Anti-Fungus:

• Gypsum plasters will not harbor insects or nourish mold growth or fungi. They pose no health hazards and are therefore frequently specified in hospitals and clinics. They are gentle on the skin and offer a clean, healthy environment.

No Curing Required:

• Gypsum plasters require no water curing and should be permitted to dry out as quickly as possible. A definite advantage considering the weather conditions in the Tropical Country like India

Fire Inhibitor:

• Gypsum is non-combustible (inert), designated class ‘O’ in a accordance with BS 476:4:1970, and contains a high content of crystal water. In the event of the fire, will act as a barrier and will protect the blockwork, concrete, and steel

Acoustic Properties:

• Gypsum (calcium sulfate) as a binder is used in the manufacture of acoustic tiles and plasters, a contributory factor to the absorption of air-borne sounds.

Bonding Properties:

• Due to the nature and structure of gypsum, it exhibits excellent bonding properties: hence is applied in a single coat on R.C.C. ceilings, Internal Bare-Brick walls, Hallow Concrete Blocks and Concrete Columns.

Rust Inhibitor:

• The Gypsum blended the gypsum plaster is the perfect rust preventive agent and inhibits corrosion of electric metal fittings, pips, etc. Metal lathings embedded in gypsum plaster will not corrode or rust. Serves durable life-long tensile and shearing movement of the background.

Ease of Application:

• International gypsum plasters are pre-mixed and available in easy to handle bags. Only the addition of water is required. A single coat application suffices in most situations resulting in less wastage of time, labor and material. Semi-skilled masons can be taught how to apply and achieve excellent finishes within a few hours on site.

Aesthetics:

• Gypsum plasters provide a smooth interior finish for ceilings and walls and are the ideal background for good quality paints and wallpaper finishes.Hours On Site.

Product Details:

We are offering Ultra White Plaster to our client.